D.A.D. - DAMPED APEX DOME™
It’s a local dampening of the apex of a silk soft dome tweeter in order to avoid this area anti-phase behaviour. In a standard soft dome tweeter, its apex anti-phase behaviour is responsible for the high frequency early roll-off. DAD tweeter allows a better hi-frequencies reproduction.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Reference: Aida, Lilium, Il Cremonese
Homage Tradition: all models
Olympica Nova: all models
Sonetto: all models
Lumina: all models
Heritage: all models
Palladio: all models
Paracross Topology™
It’s a “semi-balanced” crossover design circuitry, where some reactive components (Capacitors and inductors/coils) are placed on the negative rail of the circuit.
The crossover design is less sensitive to radio-frequencies and provides a better definition.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Reference: all models
Homage Tradition: all models
Olympica Nova: all models
Sonetto: all models
Lumina: Lumina III
Heritage: Electa Amator III, Minima Amator II
Palladio: all models
IFF CROSSOVER
With the “Interactive Fusion Filtering” the classic parallel configuration is overcome, for the drivers to work in a maximally interconnected and organic way. By reinterpreting the fundamental principles of Paracross Topology™ and using the highest quality components, the result of this correct balance is the result of long listening sessions.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Heritage: Maxima Amator
Stealth Reflex / Ultraflex™
The “Stealth Reflex” system, is an innovative “para-aperiodic” interpretation of the tuned load. It allows reduction of acoustic volumes dimensions, it provides greater extension in low frequencies response and reduction of distortions, it also eliminates spurious wind noises, typical of traditional reflex systems.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Reference: all models
Homage Tradition: all models
Olympica Nova: Olympica Nova V, Olympica Nova III, Olympica Nova II, Olympica Nova I, Olympica Nova CII, Olympica Nova CI
Sonetto: all models
Lumina: Lumina I, Lumina Center I
T.M.D. - Tuned Mass Damper™
To avoid that inner spurious vibrations interact with the speakers, these are conveyed towards the T.M.D., steel masses placed in the nodal points of the cabinet. Those masses dissipate the vibration oscillating in anti-phase, in a way very close to what happen inside the skyscrapers, designed to resist to earthquakes.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Reference: Aida, the Sonus faber SE, Lilium
Homage Tradition: Amati Tradition, Guarneri Tradition
Z.V.T. - ZERO VIBRATION TRANSMISSION™
It is a technology avoids the transmission of vibrations with frequencies below 80 Hz from the speaker to the floor. The technology is implemented using springs or elastomers placed on the loudspeaker base. The decoupler’s compliance is calculated in reason of the weight of the speaker.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Reference: all models
Homage Tradition: Amati Tradition, Serafino Tradition, Guarneri Tradition
SENSO™
SENSO™ is Omnia’s tactile illuminated wooden top panel. This touch sensitive interface allows direct control
of the system, with an additional remote operation available via the supplied handheld controller and user’s smartphone or tablet. The illuminated lines indicate the wireless speaker mode, which streaming service is in use and which input is selected, also allowing the user to adjust the volume.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Wireless: Omnia
CRESCENDO™
CRESCENDO™ this advanced signal processing system results in a greater sense of dimensionality and immersivity,
cleverly utilizing the two full range sides speakers. It creates a crisp wavefront which, through room reflections, mimics that of a live performance. A natural experience just within your room.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
Wireless: Omnia
INTONO TECHNOLOGY
Thanks to the study of resonant cavities and the creation of a separate chamber connected via a calibrated hole to the midrange enclosure, Intono technology ensures the most natural possible reproduction of midrange frequencies.
The internal air stiffness generated by the speaker’s movement is channeled and reduced by Intono’s duct, significantly reducing the size and components of the crossover filter.
IT CAN BE FOUND IN THE FOLLOWING PRODUCTS:
New Homage: Amati – 5th generation, Serafino – 2nd generation and Vox – 3rd generation
